MKS DMB12TGACJNHF54 i-Baratron 45°C Capactiance Manometer 100 Torr Transducer

Description

MKS DMB12TGACJNHF54 i-Baratron 45°C Capactiance Manometer 100 Torr Pressure Transducer
Comes with what you see in the pictures. If you don't see it, you probably won't get it.
Specifications are from MKS and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
This unit was removed from a working system that had to be scrapped due to contractual obligations. It is guaranteed to work. We do not provide calibration however.
The Unit's Serial Number Tag Reads:
Model Number:
DMB12TGACJNHF54
Serial Number:
017877575
Range:
100 Torr
CE Marked:
Yes
Breakdown by Part Number:
Type:
DMB i-Baratron Digital Capacitance Manometer (80°C)
Range:
100 Torr
Fittings:
NW 16 KF
Accuracy:
0.12% of Reading
Temperature:
45°C
Options:
None
Calibration Type:
Horizontal Cal, < 1 Torr
Interface/Connector:
0-10 VDC analog output, 9-pin D-subminiature, +24 VDC or ±15 VDC
Firmware Revision:
5.4 Analog
Specifications:
Performance:
Sensor Type:
Capacitance Manometer
Pressure Range:
100 Torr
Measurement Resolution:
0.001% F.S. on digital output
Accuracy (Non-Linearity, Hysteresis, and Non-Repeatability):
0.12% of Reading
Temperature Coefficients:
Zero:
0.002% of F.S./°C
Span:
0.02% of Reading/°C
Sensor Temperature:
45°C
Ambient Operating Temperature:
15° to 40°C
Warm-up Time:
2 Hours
Mechanical:
Materials Exposed to Gases:
Inconel or Inconel and S.S. fittings
Volume (P
x
Side):
6.3 cc
Overpressure Limit w/o Damage:
45 psia (310 kPa)
Fitting:
NW 16 KF
Electrical:
Analog I/O:
Input Power:
+24 VDC or ±15 VDC @ 300 mA max
Analog Output Signal:
0-10 VDC into > 10 KΩ load
Output Connector:
9-pin D-subminiature
Visual Communication Indicators:
LED network status (green/red), LED module status (green/red)
Regulatory Approvals:
Fully compliant to EMC Directive 2004/108/EC
Restrictions of Hazardous Substances:
Fully compliant to RoHS Directive 2002-95-EC
For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a .00 minimum for packaging, handling, and order processing. International shipping to be determined by destination.
Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.:
(1) Are you the end-user of this item?
(2) If you are not the ultimate end-user of the item, please state the ultimate end user's name.
(3) What is the ultimate country destination?
08/27/18