Hydrogenerator Micro Inclined High Power Aluminum Alloy Turbine Hydrogenerator

Description

High-power aluminum alloy turbine hydro-generator Household micro inclined hydro-generator set Micro hydro-generator set
Weight: 2.8kg
Generator height 150mm width 115mm
Material Aluminum alloy and galvanized iron
The coil is pure copper coil
Power generation up to 1000 watts
Voltage 220v
Hydraulic installation structure
This instruction applies to the instructions for the 50mm water pipe downspout. The generator's 50 pipes can be used as a reference for the description. They are all tested. The drop is based on the vertical drop. Length is not used as a reference. The vertical height is accurate. The vertical height is 10 meters, and the drop is 30 meters. It has only a 10-meter drop. You say your pipeline is 100 meters or 200 meters. It's useless because there is no hydraulic shock without vertical drop height. The amount of water requires a 50mm pipe to go through the water pipe. When the tube is full, the power generation varies with the drop height. Taking the 1000 watt micro hydro-generator as a reference, the vertical drop of about 3 meters can generate 10 watts to 20 watts, 10 meters can generate 100 watts to 300 watts, 15 meters can generate 300 watts to 500 watts, and 20 meters can generate 500 watts To 700 watts, 30 meters can send 700 watts to 1000 watts. This is based on the vertical drop as a standard, not your length. Please follow the instructions for generator installation and use. Do not let water fly around the pipes around the generator, wrap the leaks with plastic bags or electrical tape and cover the generator head with something. Put the generator in a place where it cannot be soaked by rainwater. Note all the lines. Do not short-circuit due to electric shock. Short circuit of water is not guaranteed. Water shorts are a personal installation and use issue. It has nothing to do with the manufacturer. You install and maintain the plumbing to the leak and the sprinkler, hook it up to the line, and those things don't happen. The water pipe is connected to the water outlet and the drain is connected. The pipe drains the water. You can buy sewer drain pipes PVC to connect to the generator outlet. The outer diameter of the generator is larger. Cannot be inserted directly. Fire the PVC connector and put in the plastic connector. After softening with fire, you can put it in. After putting in, seal the gap with AB glue. The generator only needs to pay attention to waterproof work,